Fluke Calibration Services
ISO/IEC 17025 Accredited Calibration and Repair Support for Fluke Test & Measurement Equipment
Accredited Fluke Calibration Services
SIMCO provides ISO/IEC 17025 accredited Fluke calibration services for digital multimeters, process calibrators, insulation testers, temperature instruments, thermal imagers, biomedical analyzers, and other Fluke test equipment. Our calibration services help organizations maintain measurement accuracy, support compliance requirements, and reduce the risk of costly measurement errors.
Fluke instruments are widely used across manufacturing, aerospace, defense, life sciences, utilities, telecommunications, industrial process, and biomedical environments where accurate measurements directly affect quality, safety, compliance, and operational performance.
SIMCO helps organizations maintain confidence in their Fluke equipment through traceable calibration results, documented measurement uncertainty, and flexible service options for individual instruments and multi-site calibration programs.
Calibration Support for Fluke Test and Measurement Equipment
SIMCO provides calibration services for a broad range of Fluke instruments used in electrical, temperature, pressure, process, biomedical, and diagnostic applications.
Our Fluke calibration services can help your organization:
- Maintain traceable measurement results
- Support audit and compliance requirements
- Reduce the risk of inaccurate measurements
- Verify instrument performance against applicable specifications
- Improve calibration program consistency
- Manage calibration needs across multiple facilities or service areas
- Reduce downtime through coordinated calibration and repair support
Whether you are managing a single Fluke digital multimeter, a Fluke 87V True RMS Multimeter, a Fluke 1503 Insulation Tester, a Fluke 179 Digital Multimeter, or a large population of Fluke instruments across multiple locations, SIMCO can help support your calibration program with scalable service options.
Request A Quote:
Fluke Equipment We Calibrate
SIMCO provides calibration services for many Fluke instrument categories, including:
Electrical Test Instruments
- Digital multimeters
- True RMS multimeters
- Clamp meters
- Insulation resistance testers
- Earth ground testers
- Installation testers
- Electrical testers and troubleshooters
- Power quality analyzers
- High-voltage probes
Common Fluke electrical models calibrated by SIMCO include the Fluke 87V, Fluke 179, Fluke 115, Fluke 117, Fluke 77IV, Fluke 87III, Fluke 189, Fluke 83V, Fluke 289, Fluke 177, and Fluke 80K-40 High Voltage Probe.
Process and Multifunction Calibrators
- Multifunction process calibrators
- Loop calibrators
- Documenting process calibrators
- Temperature calibrators
- Pressure calibrators
- Signal generators
Temperature and Thermal Measurement Equipment
- Infrared thermometers
- Thermal imagers
- Thermocouple thermometers
- RTD measurement instruments
- Environmental monitoring instruments
- Temperature modules
Common Fluke temperature-related models calibrated by SIMCO include the Fluke 52 II Dual Input Digital Thermometer, Fluke 51 II Digital Thermometer, and Fluke 80TK Thermocouple Module.
Oscilloscopes and Diagnostic Equipment
- Portable oscilloscopes
- Scope Meters
- Network and cable analyzers
- Battery analyzers
Common Fluke diagnostic models calibrated by SIMCO include the Fluke 199CM ScopeMeter.
Biomedical and Safety Test Equipment
- Electrical safety analyzers
- Patient simulators
- Vital signs simulators
- Biomedical analyzers, where applicable
Common Fluke biomedical models calibrated by SIMCO include the Fluke ESA612 Electrical Safety Analyzer, ProSim 8 Vital Signs Simulator, and ProSim 3 Vital Signs Simulator.
If your specific Fluke model is not listed, contact SIMCO to confirm calibration or repair support availability.
Common Fluke Instruments and Applications
| Fluke Instrument Type | Common Applications |
|---|---|
| Digital multimeters | Electrical measurement, troubleshooting, inspection, and quality checks |
| True RMS multimeters | Accurate electrical measurements in complex signal environments |
| Clamp meters | Current measurement, field service, facility maintenance, and electrical diagnostics |
| Insulation resistance testers | Electrical safety testing, preventive maintenance, and equipment verification |
| Process calibrators | Loop checks, process validation, control system maintenance, and instrumentation support |
| Temperature instruments | Thermal measurement, process monitoring, environmental checks, and quality control |
| Pressure calibrators | Pressure measurement, process control, and maintenance applications |
| Power quality analyzers | Facility power diagnostics, utilities, manufacturing, and equipment troubleshooting |
| ScopeMeters and portable oscilloscopes | Field diagnostics, electrical troubleshooting, and electronic test applications |
| Thermal imagers | Inspection, diagnostics, maintenance, and thermal analysis |
| Biomedical test equipment | Safety testing and performance verification in healthcare environments |
ISO/IEC 17025 Accredited Calibration for Fluke Instruments
SIMCO offers ISO/IEC 17025 accredited calibration services for applicable Fluke instruments, measurement ranges, and parameters.
Accredited calibration may include:
- As-found and as-left measurement data
- Documented measurement uncertainty
- Traceability to the International System of Units through national metrology institutes such as NIST or other recognized reference standards
- Pass/fail statements, where applicable
- Calibration documentation to support audits, compliance activities, and quality-management requirements
Accredited calibration is often required when measurement results directly affect product acceptance, process validation, safety verification, regulated manufacturing, or customer quality requirements.
Why Calibrate Fluke Equipment?
Fluke instruments are commonly used to verify critical electrical, process, pressure, temperature, and safety parameters. Over time, normal use, environmental exposure, transportation, handling, and frequency of use can affect measurement performance.
Without routine calibration, inaccurate measurements can contribute to:
- Product quality issues
- Failed audits
- Process deviations
- Incorrect troubleshooting decisions
- Compliance risk
- Increased measurement uncertainty
- False acceptance or false rejection of products or processes
Routine calibration helps verify that Fluke instruments continue to perform within applicable specifications and remain suitable for their intended use.
For quality-driven organizations, accredited calibration also provides objective evidence of traceability, technical competence, and documented uncertainty to support customer requirements, internal quality systems, and regulatory expectations.
Fluke Calibration for Manufacturing, Utilities, Aerospace, and Life Sciences Industries
SIMCO supports Fluke calibration needs across industries where measurement accuracy, documentation, and uptime are critical.
Our Fluke calibration services support organizations operating in:
- Aerospace and Defense
- Life sciences and medical device manufacturing
- Semiconductor and electronics manufacturing
- Advanced manufacturing
- Utilities and power generation
- Industrial process environments
- Telecommunications
- Biomedical and healthcare technology environments, where applicable
SIMCO can help customers align calibration service levels with internal quality requirements, regulatory expectations, customer specifications, and equipment-use criticality.
Service Options for Fluke Calibration
SIMCO supports calibration programs through flexible service options designed to fit different operational needs.
Available options may include:
- Lab-based calibration
- Onsite calibration support, where available and applicable
- Pickup and delivery options in supported service areas
- Multi-site calibration program support
- Calibration documentation and certificate management
- Repair coordination for supported instruments
- Asset-management and compliance support through CERDAAC
Service availability may vary by instrument type, location, accreditation requirements, and specific model.
Fluke Repair Coordination and Post-Repair Calibration
In addition to calibration services, SIMCO can help coordinate repair support for many Fluke instruments when repair is available.
Repair support may include:
- Functional evaluation
- Repair coordination
- Component replacement, where available
- Performance verification
- Preventive maintenance support
- Post-repair calibration
Combining calibration and repair support through a single provider can help simplify equipment management, reduce administrative burden, and help return instruments to service with documented performance verification.
Calibration Documentation and Asset Management
For organizations managing large Fluke equipment populations, calibration documentation and asset visibility are just as important as the calibration event itself.
SIMCO helps customers manage calibration records, certificates, asset history, scheduling, and reporting through CERDAAC, SIMCO’s calibration and asset-management software.
CERDAAC can help teams:
- Track calibration status
- Access calibration certificates
- Manage asset history
- Support audit readiness
- Improve visibility across multiple locations
- Reduce manual administrative work
- Support more consistent calibration program execution
Frequently Asked Questions About Fluke Calibration Services
Do you calibrate Fluke digital multimeters?
Yes. SIMCO provides calibration services for many Fluke digital multimeters and electrical test instruments, including commonly used models such as the Fluke 87V, Fluke 179, Fluke 115, Fluke 117, Fluke 77IV, and other Fluke multimeter models. Contact SIMCO with your model number to confirm service availability and calibration options.
Can SIMCO provide ISO/IEC 17025 accredited calibration for Fluke instruments?
Yes. SIMCO offers ISO/IEC 17025 accredited calibration for applicable Fluke instruments, parameters, and measurement ranges. Accreditation availability depends on the specific model and required calibration scope.
Do you calibrate Fluke insulation testers?
Yes. SIMCO provides calibration support for many Fluke insulation testers and insulation multimeters, including models such as the Fluke 1503, Fluke 1507, and Fluke 1587 FC, where applicable.
Do you calibrate Fluke process calibrators?
Yes. SIMCO supports calibration for many Fluke process and multifunction calibrators, including loop calibrators, documenting process calibrators, temperature calibrators, and pressure calibrators.
Can Fluke equipment be calibrated onsite?
Onsite calibration may be available for certain Fluke instruments depending on the equipment type, location, calibration requirements, and service scope. Contact SIMCO to discuss onsite calibration options for your facility.
Do you repair Fluke instruments?
SIMCO can help coordinate repair support for many Fluke instruments when repair is available. After repair, calibration can be performed to verify instrument performance before the equipment is returned to service.
What information do I need to request a Fluke calibration quote?
The most helpful information includes the Fluke model number, quantity, required calibration level, service location, accreditation requirements, and whether the instrument requires repair or functional evaluation.
Can SIMCO support Fluke equipment across multiple facilities?
Yes. SIMCO supports calibration programs for organizations managing equipment across multiple facilities or service areas. SIMCO can help coordinate calibration services, documentation, asset tracking, and program support across locations.
Common Fluke Models Calibrated by SIMCO
SIMCO calibrates many commonly used Fluke test and measurement instruments, including digital multimeters, insulation testers, temperature instruments, scope meter portable oscilloscopes, data acquisition modules, electrical safety analyzers, and biomedical patient simulators.
The list below includes examples of frequently calibrated Fluke models supported by SIMCO.
- Fluke 87V Industrial Multimeter
- Fluke 179 True-RMS Digital Multimeter
- Fluke 1503 Insulation Resistance Tester
- Fluke 77 IV Digital Multimeter
- Fluke 115 True-RMS Digital Multimeter
- Fluke 87 III True RMS Multimeter
- Fluke 87 Digital Multimeter
- Fluke 189 True RMS Logging Multimeter
- Fluke 117 Electrician’s Multimeter with Non-Contact Voltage
- Fluke 45 Dual Display Multimeter
- Fluke 83V Average Responding Industrial Multimeter
- Fluke 199CM ScopeMeter Test Tool
- Fluke 289 True-RMS Industrial Data Logging Multimeter
- Fluke 177 True-RMS Digital Multimeter
- Fluke 77 Digital Multimeter
- Fluke 52 II Dual Probe Digital Thermometer
- Fluke 80TK Thermocouple Module
- Fluke 77 III Digital Multimeter
- Fluke 175 True-RMS Digital Multimeter
- Fluke 2680A-PAI Precision Analog Input Module
- Fluke 8050A Bench/Portable Digital Multimeter
- Fluke 8010A Digital Multimeter
- Fluke 287 True-RMS Electronics Logging Multimeter
- Fluke Biomedical ESA612 Electrical Safety Analyzer
- Fluke 73 III Digital Multimeter
- Fluke 114 True-RMS Electrical Multimeter
- Fluke 80K-40 High Voltage Probe
- Fluke 116 HVAC Multimeter with Temperature and Microamps
- Fluke Biomedical ProSim 8 Vital Signs and ECG Patient Simulator
- Fluke 51 II Handheld Digital Probe Thermometer
Fluke is a trademark of Fluke Corporation. SIMCO Electronics is not affiliated with, sponsored by, or endorsed by Fluke Corporation. All product names, company names, trademarks, and registered trademarks are the property of their respective owners. SIMCO Electronics is not affiliated with, sponsored by, or endorsed by the manufacturers referenced on this page.
Ready to Simply Your Calibration Program
Tell us the model number, instrument type, location, and service requirement. SIMCO will help confirm calibration support and route your request.